Download the free pattern here, tutorial below.
Video tutorial here – full picture tutorial below:
1 – Cut out the pattern
Assemble the pattern. You can find assembly directions on this page. Place the pattern on the fold and cut 1. Repeat if you desire to make more than one cloth. Cut 2 inch strips to equal 64″ you most likely will need to sew strips together.
2 – Make Binding
For Detailed information on how to bind please see the video above. Sew the strips together as needed. Check to make sure that the nap of the fleece is the same direction on the binding Pin the binding to one side and using a straight stitch with a .5 inch seam allowance sew on. Right sides of fabric together. Then flip the binding the the other side , fold under a half inch and sew onto other side using a serpentine stitch. The you’re finished.