You will need:
Remaining cuddle strips from kit ( Unfortunately the exact kit used in the series is no longer available – but you can find a similar kit here)
Rotary cutter, ruler and mat
Jingle bell (optional)
Disclaimer: This is a paid for tutorial by Shannon Fabrics.
Video tutorial here, written below:
Take the remaining pieces from your cuddle strip kit and cut out six 5 inch by 5 inch blocks. To make different sizes simple cut out six squares all the same size.
Arrange the blocks in a cross shape. Sew the shape together block by block using a half inch seam allowance.
Now it’s time to make the block 3D. Take the top corner of the left corner of the cross and pin to to the top left corner of the left block together to begin to make a cube. Continue in this manner to make an inside out cube, be sure to leave a section of 2 inches open for turning. Sew the seams together using a half inch seam allowance. Trim corners and turn right side out.
Stuff the block with poly fill to the firmness desired. Half way through stuffing the block add a jingle bell if you like. Hand sew the gap shut.