Glowing Maleficent Staff DIY for the Mistress of All Evil
This content contains affiliate links or sponsored elements, read our Disclosure Policy.
This Glowing Maleficent Staff DIY is perfect for Halloween costumes or cosplay. With it’s rich layers and textures it is a stunning addition to the “Mistress of All Evil”.
The staff glows in the dark and adds a fun spooky look. Because of the detailing on the staff be sure to allow yourself enough time to complete this project.
By the way I have this Maleficent Minnie Ears Tutorial – you could easily make without the ears to make the horns for your costume!
Materials you will need:
Tissue Paper (I used white, but you could use colored paper, it won’t matter)
Black Spray Paint
Craft Paint: Black, Brown, Yellow, Green, Grey
PVA Glue (school glue)
½-inch Dowel, 4-5 feet long ( you can also buy a cheap broom at the dollar store and remove the brush section too!)
3-4-inch Clear Plastic Fillable Ornament
Water
Aluminum Foil
Tools
Paint Brushes
Hot Glue Gun & Glue
Large Bowl
Fan
Glowing Maleficent Staff DIY
Step 1 – Begin to build up the Staff with “Vines”
Take a portion of aluminum foil
and roll it up into a thick cylinder.
Wrap the aluminum foil cylinder around the dowel like a vine.
Hot glue in place.
Repeat with sections of aluminum foil, connecting vines at the ends, sides, looping them over each other and hot gluing them in place.
At the base of the dowel, “finish” each vine with a ball of aluminum foil hot glued in place, protruding partially from the dowel.
Make a small cone of aluminum foil and bend it slightly, forming a claw. Hot glue this in place on the partially protruded ball of aluminum foil.
Wrap aluminum foil around the claw and ball to create a more smooth transition from vine to claw. Hot glue in place.
Step 2 – Add texture to Maleficent’s Staff
Mix ½ cup glue with 1 cup of water in the large bowl.
Dip strips of tissue paper into the water/glue mixture and gently squeeze out the extra moisture.
Affix the wet tissue paper to the aluminum foil, wrapping the tissue paper around each vine and scrunching it to make it look like a vine’s bark.
Continue covering all of the aluminum foil with the tissue paper, creating a paintable surface.
Once all of the aluminum foil is covered, allow the dowel to dry completely by placing it in front of a fan. This may take 24 hours or more to dry, so please test it before moving forward.
Step 3- Paint the Staff
When the tissue paper is dry, paint the entire staff black. To do this quickly, I did so with spray paint. Allow paint to dry completely.
Dry brush the entire staff brown, taking care to leave the deeper areas darker and thus more shaded. This will make the staff look like it has more depth and life. Allow brown paint to dry completely.
Dry brush the high points of the staff with grey paint, leaving the brown and black in the deeper parts of the staff. Allow brown paint to dry completely.
Step 4 – Make the Glowing Orb to the staff
Paint the inside of both sides of the fillable ornament with the glow in the dark glue.
When the glue becomes tacky, dry brush on green,
black and yellow paint in streaky areas. Allow paint and glue to dry completely.
Stuff the fillable ornament full of the clear package wrap and close the ornament.
Hot glue to keep it closed.
Affix the ornament to the end of the staff with hot glue.
Step 5 – Meld the Orb to the Rest of Maleficent’s Staff
Using the paper clay, form a cone and continue the vine structure from the dowel up onto the ornament,
swirling the vine up and around the ornament as desired. I added several vines, but that is entirely up to you.
Allow paper clay to dry completely, then paint in the same order as the tissue paper,
black over entirety,
brown over the majority, and grey on high points.
Allow paint to dry completely.
You just completed the Maleficent Staff DIY!
Whoaa! This is an amazing staff!
Big thank you for sharing this guide!
Did you use tissue paper meaning the paper you use to decorate a gift bag or tissue paper meaning toilet paper?
Tissue paper from a gift bag. 🙂